Packard PSMJ189 Motor Start Capacitor. 189-227 MFD UF / 165 VAC

Packard PSMJ189 Motor Start Capacitor 189-227 MFD UF / 165 VAC

The Packard PSMJ189 Motor Start Capacitor is designed for use in AC motor starting circuits, with a rating of 189-227 MFD UF and 165 VAC. This component aids in effectively starting motors by providing the initial surge of energy needed for operation.

Compatible Models

This capacitor can replace various models and part numbers.

• 189-227 MFD UF
• 165 VAC

Specifications

Part Number	PSMJ189
Replaces	189-227 MFD UF
Rated Voltage	165VAC
Dimensions	1-7/16 Diameter x 3-3/8 Height
Terminals	1/4" male terminals
Frequency	50/60HZ
Operating Temperature	-40C to 65C (-40F to 149F)
Material	Molded phenolic resin or plastic

Signs You Need This Part

• Motor will not start or struggles to start.
• Increased noise coming from the motor during operation.
• Frequent tripping of breaker connected to the motor.
• Motor performance is noticeably weaker than before.

Installation

1. Unplug the appliance or turn off power at the breaker.
2. Access the motor compartment to locate the old capacitor.
3. Disconnect the old capacitor from the terminals by removing the wires carefully.
4. Connect the new Packard PSMJ189 Motor Start Capacitor using the same terminal connections.
5. Reassemble the compartment and restore power to test the motor operation.

Frequently Asked Questions

Does the PSMJ189 fit my motor?

This capacitor is suitable for use in various AC motor applications requiring a rating of 189-227 MFD UF and 165 VAC.

Is this capacitor polarized?

The Packard PSMJ189 is a non-polarized capacitor and can be used in either direction.

What are the dimensions of this capacitor?

The dimensions are 1-7/16 inches in diameter and 3-3/8 inches in height.

Can this capacitor be used in a residential application?

Yes, the capacitor is suitable for various residential AC motor starting applications.